Posted in Uncategorized

InAES 2017 – The 7th International Annual Engineering Seminar

InAES 2017 is organized into 10 symposiums covering all relevant technical areas within the conference scope, but not limited to:

International Symposium on Architecture and Urban Planning


1. Architecture Design Studies,
2. Building Technology Studies,
3. History, Theory, And Critics of Architecture and Conservation,
4. Housing and Urban Design and Planning,
5. Environment Behaviour Studies,
6. Rural and Regional Planning Studies.

International Symposium on Chemical and Bioprocess Engineering


Chemical Engineering, Separation Process, Reaction Engineering, Product Engineering and Chemical Process, Waste Treatment and Pollution Control, Mineral Processing, Chemical Engineering Education

Selected papers will be published at Asean Journal of Chemical Engineering (http://aseanjche.ugm.ac.id/) that is indexed by SCOPUS

International Symposium on Civil and Environmental Engineering


Water Resources Engineering, Structural Engineering, Construction Management, Geotechnical Engineering, Transportation Engineering, Disaster Mitigation, Green Infrastructure, Water Quality and Management, Wastewater Treatment and Management, Climate Change Model, Climate Change Adaptation and Mitigation.

Selected papers will be published at Journal of the Civil Engineering Forum (https://jurnal.ugm.ac.id/jcef) that is under process to be indexed by Directory of Open Access Journals, and possible indexation by SCOPUS

International Symposium on Electronics, Control, Computer, and Information and Communication Technology


Green Design for VLSI and Micro Electronic Circuits, Embedded Systems and SoC design, Power Electronics, RF Devices and Circuits. Computer-Aided – Electronics Design and Technology, Device Material and Manufacturing Technology, Photonic and Optoelectronic Circuits, Biomedical Electronics, Control Theory and Applications, Robotics and Autonomous Systems, Intelligent Control, Robust and Nonlinear Control, Adaptive Control, Industrial Automation and Control Systems Technology, Control of Infinite Dimensional Systems, Geometric Control Theory and Applications, Heterogeneous Networks, Multimedia Communications, Wireless Ad-hoc and Sensor Networks, Network Security, Cognitive Radio, Cooperative Communications, Radio Resource Management and Optimization, Vehicular Communication Systems, Satellite Communications, Antennas, Propagation and Channel Modeling, Signal Processing for Communications, Spread Spectrum Systems, Ultra Wide Band Technology, Information Theory and Coding Systems, Machine-to-Machine (M2M) Communications, Mobile Computing, Energy-aware Distributed System, Intelligent Information Systems, Knowledge Discovery and Data Mining, Artificial Intelligent, Decision Support Systems, Visualization and Computer Graphic, Signal and Image Processing, Pattern Recognition, Multimedia Applications and Technologies, Soft Computing Methods, Information System Security, e-Government, Creating Green Awareness using IT, Machine-to-Machine (M2M) Applications, Internet of Things.

Accepted and presented papers will be submitted to IEEE Xplore.

ieee xplore

International Symposium on Remote Sensing and Geomatics Engineering

Photogrammetry, GIS and Remote Sensing Application, Geodesy, Land administration, Boundary delimitations, Hydrography, Cadastral surveys, Construction surveys, UAV and USV, Disaster Mitigation and Management, GNSS application, Airborne and Terrestrial Laser Scanning, Hidrography, Spatial Data Infrastructure, Cartography, Standard in Geospatial Information, Surveying profession.

Selected papers will be submitted to IEEE Xplore.

ieee xplore

International Symposium on Mechanical and Industrial Engineering

Acoustic and Noise Control, Applied Mechanic, Automotive Engineering, Machining and Machine Design, Computational Mechanic, Mechanical Design, Dynamic and Vibration, Tribology, Bio Mechanic, Manufacturing and Production Process, CAD CAM, Manufacturing System and Simulation, Robotic, Aerospace, Internal Combustion Engine, Energy Conversion, Manufacture, Automation, Engineering Materials and Structures, Mechanics of Materials, Failure Mechanics, Product Design, Solid Mechanic,  Sustainable Development and Environment Protection, Human Factor Engineering, Safety, Security and Risk Management, Project Management, Supply Chain Management, Big Data and Analytic, Decision Analysis and Method, Operation Research, Intelligent System, Health Care System and Management, Reliability and Maintenance Engineering, System Modeling and Simulation, Technology Strategy and Management, New Product Development, Process Innovation and Development, Managing IT and E-Commerce, Knowledge Management, Intellectual Property Right and Patent Management, Human Capital for Innovation, System Design and Engineering, Six Sigma and Quality Management, Service Innovation and Management.

Selected papers will be submitted to IEEE Xplore.

ieee xplore

International Symposium on Geoscience, Mining, and Petroleum Engineering


Applied Geology, Energy Resources, Mineral Resources, Geo-Disaster Mitigation

International Symposium on Nuclear Engineering and Engineering Physics


Nuclear Engineering & Technology, New and Renewable Energy, Energy Management and Services, EnergyPolicy, Smart and Green Building,  Sensor, Instrumentation & Control, Acoustics, Optics.

Selected papers will be submitted to IEEE Xplore.

ieee xplore

International Symposium on Power and Energy

Future Integrated Electric Power System, Smart Grids: Existing & Emerging Technologies, Power Electronics, HVDC, FACTS, Renewable Energy: Generation and Integration, Energy Storage, Microgrids and Remote Communities, Energy Conservation and Efficiency, Electricity Markets and Business Models, Integrated Energy System Planning, Computational Methods and Reliability, Government Initiatives, Policies and Smart Grids, etc.

Accepted and presented papers will be submitted to IEEE Xplore.

Contact Person : +62 818 0400 5544 (Dimas)
inaes2017@ugm.ac.id
Website : http://inaes2017.ugm.ac.id/
Conference Date : Tuesday, 01 August 2017 – Wednesday, 02 August 2017

 

Posted in Competitions, Conferences

Second International Conference on Communication & Media Studies

2017 Call for Papers

We are inviting proposals for paper presentations, workshops/interactive sessions, posters/exhibits, virtual lightning talks, virtual posters, or colloquia addressing one of the following themes:

  • THEME 1: MEDIA CULTURES
  • THEME 2: MEDIA THEORY
  • THEME 3: MEDIA TECHNOLOGIES AND PROCESSES
  • THEME 4: MEDIA BUSINESS
  • THEME 5: MEDIA LITERACIES
  • 2017 Special Focus: Rethinking the Mediascape – The Future of Media and Communication

Important Dates

We welcome the submission of proposals at any time of the year. All proposals will be reviewed within two to four weeks of submission. The dates below serve as a guideline for proposal submission based on our corresponding registration deadlines.

Proposal & Registration Dates

Proposal Deadlines

Advance Proposal Deadline 16 January 2017
Early Proposal Deadline 16 April 2017
Regular Proposal Deadline 16 August 2017
Late Proposal Deadline 16 October 2017

Registration Deadlines

Advance Registration Deadline 16 February 2017
Early Registration Deadline 16 May 2017
Regular Registration Deadline 16 October 2017
Late Registration Deadline 16 November 2017
Posted in Competitions

Lomba Essay Nasional ATIC 2017 di UGM

Tema Lomba Esai ini adalah sebagai berikut;

Optimalisasi Agroindustri dalam Mewujudkan Indonesia Sebagai Lumbung Pangan

Syarat dan Ketentuan Lomba Essay Nasional ATIC 2017 di UGM

  • Peserta adalah mahasiswa jenjang diploma (D3/ D4) ataupun sarjana (S1) yang terdaftar aktif di Perguruan Tinggi Negeri atau Swasta di Indonesia dibuktikan dengan melampirkan Kartu Tanda Mahasiswa yang berlaku.
  • Peserta  dapat  berupa  perorangan  maupun  tim yang  terdiri dari  maksimal  2 orang,  dengan 1 orang sebagai ketua dan anggota kelompok.
  • Peserta dalam satu tim diperbolehkan berasal dari disiplin ilmu yang berbeda tetapi masih dalam perguruan tinggi yang sama.
  • Setiap tim diperbolehkan mengirimkan karya maksimal 2 naskah  Essay yang  berbeda dan melakukan pembayaran sesuai jumlah naskah yang dikirim.
  • Tiap-tiap peserta maksimal hanya boleh terdaftar dalam 2 tim yang berbeda. Dan setiap peserta hanya diperbolehkan menjadi ketua tim dalam 1 judul naskah essay.
  • Peserta mendaftar hingga batas yang telah ditentukan dan melakukan mekanisme registrasi sesuai dengan prosedur pendaftaran.
  • Peserta yang terbukti melakukan kecurangan dalam bentuk apapun akan mendapatkan sanksi pengurangan penilaian atau didiskualifikasi.
  • Pemenang lomba Essay merupakan peserta dengan nilai tertinggi hasil kumulatif dari semua aspek penilaian yang sudah dikategorikan dalam penilaian essay.
  • Ketentuan yang belum tercantum diatas akan diatur di kemudian hari.
  • Naskah ditulis minimal 3 halaman dan maksimal 7 halaman. Jumlah halaman
    tidak termasuk cover serta lampiran-lampiran.
  • Jumlah halaman yang tidak sesuai dengan ketentuan jumlah halaman akan mempengaruhi penilaian. Cover sesuai dengan di lampiran panduan.
  • Judul Essay bebas, namun harus sesuai dengan tema lomba. Nama penulis Essay dan asal universitas diletakkan di bawah judul.
  • Batas ppendaftaran dalam lomba ini sampai dengan tanggal 9 Juni 2017

Hadiah  Lomba Essay Nasional ATIC 2017 di UGM

  • Juara 1 : Sertifikat + Uang Tunai sebesar Rp 750.000 + Tiket seminar Success With Agroindustry
  • Juara 2 : Sertifikat + Uang Tunai sebesar Rp 500.000 + Tiket seminar Success With Agroindustry
  • Juara 3 : Sertifikat + Uang Tunai sebesar Rp 250.000 + Tiket seminar Success With Agroindustry

Informasi selengkapnya mengenai Lomba Essay Nasional ATIC 2017 di UGM silahkan bisa langsung menghubungi pihak penyelenggara lomba dengan alamat media sosial dan juga websitenya sebagai berikut; 085647332404 (pratiwijunaedi) & 081223249563 (zaviraak) Ig : swag_ugm
Line : @tvz9625g web: http://www.himatipa.tp.ugm.ac.id

Posted in Competitions, Conferences

CONMEDIA 2017 THE 4TH INTERNATIONAL CONFERENCE ON NEW MEDIA 2017

General information
Prospective authors are invited to submit full papers of up to six pages including figures and tables in English. All papers are to be submitted electronically in PDF format. Authors themselves are responsible for converting their files into PDF; they must not request the conversion to the program committee. Please note that only PDF file will be accepted. Papers in other formats, e.g., MS-WORD, TEX SOURCE FILE, will not be accepted.

All accepted and presented papers in CONMEDIA 2017 will be submitted in IEEE Xplore Digital Library, which will be indexed by SCOPUS. Others will be publish in our website that indexed by google scholar.

Submission deadline
Please submit your Full Paper by July 14, 2017 for review through the EDAS systems which can be accessed here by logging in as author. Note that you have got to have an account at EDAS to be able to do that. To register with the systems, you can create the account from this link. Please email the conference organizer at conmedia2017@umn.ac.id for further enquiries regarding details of submission.

Submission site will be opened on 31-01-2017.

Paper Format
Please use the templates (text, MS Word) available here to prepare your manuscript.

  • The paper should be on A4 size paper (210 mm x 297 mm or 8.27 inches x 11.69 inches).
  • Two-column format.
  • Top and bottom margins of 25 mm (1 inch).
  • Left and right margins of 14 mm(0.6 inch).
  • Column width of 88 mm(3.45 inches) and inter-column gap of 5 mm(0.2 inch).
  • Paper title is centered.
  • Recommended font size of the title is around 24 pt.
  • Center author information beneath the title font in 12 point font, non-boldface type.
  • The normal text of the paper must be in 10 pt size.
  • All figures and tables should be clearly visible.
  • Paper length and PDF file size
  • Your manuscript should not exceed 6 pages. The size of the PDF file of the paper should not exceed 3 MB.

Presentation of Papers at the Conference
Accepted papers will be presented either in oral during the Parallel Sessions, or as a poster in Poster sessions. The conference program can be read from this page.

Oral Paper Presentation
Each Parallel Sessions will have at least 4 oral paper presentations from different authors. Each paper should receive a maximum allocation of 20 minutes which includes presentation and question-answer session. Since we would like to give as much opportunity as possible for questions, we should aim for the presentations to be around 10-15 minutes.

There will be Session Chair responsible for each of the parallel sessions. Session Chairs must ensure that things run smoothly, each presenter has ample time to present their paper and a lively discussion session can occur during the session.

Poster Session
Another group of accepted papers will be displayed as poster during the conference. Papers accepted as poster are included in the conference proceedings. Each poster presenter will be alloted with a poster board. The poster should not be larger than the standard A1 size (33.11in x 23.39in = 841mm x 594mm), which may be put up either portrait or landscape.

Author(s) are responsible for producing their own posters. Organizers only provided the space for displaying the posters. Board assignment for each author/participant will be instructed on site. At the conference, each participant must put up the poster at the start of his/her session on the assigned board to take off the poster at the end of the session.

Full Paper submission due July 14, 2017
Notification of acceptance (full paper) August 18, 2017
Submission of Camera Ready Paper September 15, 2017
Early bird registration August 18 – September 15, 2017
Regular registration September 16 – October 15, 2017
Conference date November 8 – 10, 2017
City tour November 10, 2017
Posted in Competitions, Conferences

2017 SPE Asia Pacific Regional Student Paper Contest

We are pleased to advise that the 2017 SPE Asia Pacific Regional Student Paper Contest will be held in conjunction with SPE’s regional flagship event, the 2017 SPE/IATMI Asia Pacific Oil & Gas Conference and Exhibition (APOGCE) at the Bali Nusa Dua Convention Center, Bali, Indonesia, on 17-19 October 2017.

We welcome and encourage SPE student chapter members in Asia Pacific to submit paper abstracts for the opportunity to be shortlisted to participate and present their technical presentations at the event at APOGCE.

The contest is open to Undergraduate and Postgraduate student members. Winners of both categories will be invited to attend and compete at the SPE International Student Paper Contest, held during the SPE Annual Technical Conference and Exhibition (ATCE) from 24-26 September 2018 in Dallas, Texas, USA. In addition to showcasing their technical knowledge at the contest, the winning regional representatives will have the opportunity to meet practicing professionals and industry members from across the globe for their professional career development.

Your abstract and participating details must be submitted at APPLY APSPC. The submission deadline is 14 July 2017. For enquiries, please contact apspc@spe.org

IMPORTANT: Submissions via email will NOT be accepted. Each student chapter/university may only submit TWO (2) contestants per category. Please check with your respective chapters before submitting your abstract. The organising committee reserves the right to reject any submission not in accordance with the terms of the contest.

We look forward to your participation.

Posted in Competitions

I. Tema “Inovasi Menginspirasi untuk Negeri “

Sub Tema

 Inovasi dalam bidang ilmu pengetahuan dan teknologi

 Inovasi dalam bidang pemberdayaan masyarakat

 Inovasi dalam bidang sosial budaya

 Inovasi dalam bidang pengembangan kepemudaan

 Inovasi dalam bidang ekonomi dan enterpreneur

II. Ketentuan Umum :

a. Peserta merupakan pemuda/pemudi dari seluruh Indonesia berusia dibawah 26 tahun b. Peserta bersifat perorangan

c. Peserta mewakili instansinya masing-masing baik Sekolah, Universitas, Komunitas atau Instansi lainnya dengan melampirkan scan KTP/KTM atau tanda pengenal lainnya. d. Peserta mengisi formulir pendaftaran di bit.ly/PendaftaranLombaEssayInovatorNusantara2017

e. Essay ditulis dengan menggunakan bahasa Indonesia yang baik dan benar sesuai kaidah tata bahasa Indonesia yang berlaku

f. Setiap peserta wajib membayar biaya pendaftaran sebesar Rp. 50.000,-

g. Biaya pendaftaran dikirimkan ke nomor rekening berikut: Bank MANDIRI Nomor Rekening 136-00-1527192-4 atas nama Yogi Lasril

h. Konfirmasi pembayaran dengan format “Konfirmasi Pembayaran_Nama Lengkap_Instansi dengan melampirkan bukti pembayaran berupa foto atau scan yang dikirmkan kepada Contact Person

Yogi Lasril

082216608615 (Whatsapp/telepon)*

yogialfath (line)*

contact@inovatornusantara.com (email)*

*Pilih salah satu

Info Lebih lanjut bisa dilihat di:

bit.ly/PedomanLombaEssayInovatorNusantara2017

Untuk Registrasi :

bit.ly/PendaftaranLombaEssayInnovatorNusantara2017